System-sensor FAAST Networking Manual de usuario Pagina 13

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 12
User Guide: FAAST Fire Alarm Aspiration Sensing Technology® Networking
13
4. Click the Network tab to display the network parameters.
5. Connect to the detector by right-clicking and selecting Connect Device.
6. In the Connect window, ensure the correct IP address for the detector is entered in the Host field. Change the User from
Read-Only to Administrator. Finally, enter the password for the detector in the Password field. The default password is
“password”. Click Connect.
Vista de pagina 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comentarios a estos manuales

Sin comentarios