System-sensor M500FP Manual de usuario descargar pdf

SS-460-010 I56-3870-001

M500FP Firephone Control Module

INSTALLATION AND MAINTENANCE INSTRUCTIONS

BEFORE INSTALLING

This information is included as a quick reference installation guide. If the

modules will be installed in an existing operational system, inform the op-

erator and local authority that the system will be temporarily out of service.

Disconnect power to the control panel before installing the modules.

NOTICE: This manual should be left with the owner/user of this equipment.

GENERAL DESCRIPTION

M500FP Firephone Control Modules are intended for use in intelligent, two-

wire systems, where the individual address of each module is selected using

the built-in rotary switches. This module is used to connect a remote fire-

fighter telephone to a centralized telephone console. A ringing sound is pro-

vided at each off-hook handset until it is connected to the console. Wiring to

individual telephone jacks and handsets is supervised, and status is reported

to the panel as NORMAL, TROUBLE, or TELEPHONE. The M500FP has two

pairs of output termination points available for fault-tolerant wiring, and in-

cludes a panel-controlled LED indicator.

COMPATIBILITY REQUIREMENTS

To ensure proper operation, this module shall be connected to Listed compat-

ible system control panels only.

MOUNTING

This module mounts directly to 4″ square electrical boxes (see Figure 2A).

The box must have a minimum depth of 2

/8″. Flush mounted electrical boxes

(SMB500) are available.

WIRING

NOTE: All wiring must conform to applicable local codes, ordinances and

regulations.

1. Install module wiring in accordance with the job drawings and appropri-

ate wiring diagrams (Figures 3-4).

2. Set the address on the module per job drawings.

3. Secure module to electrical box (supplied by installer), as shown in

Figure 2.

FIGURE 1. CONTROLS AND INDICATORS

FIGURE 2. MODULE MOUNTING:

C1070-03

C1059-02

SPECIFICATIONS

Normal Operating Voltage: 15 to 32 VDC

Maximum Current Draw: 7.5mA (LED on)

Average Operating Current: 2.4mA (LED flashing)

SLC Wiring Resistance: 40 Ohms

Supervisory Wiring Resistance: 50 Ohms

Handset Offhook Resistance: 400 to 1,500 Ohms

External Supply Voltage (between Terminals T10 and T11)

Regulated 24VDC

Temperature Range: 32˚F to 120˚F (0˚C to 49˚C)

Humidity: 10% to 93% Non-condensing

Dimensions: 4.5” H x 4.275” W x 1.4”D (Mounts to a 4” square by 2

/8” deep box.)

Accessories: SMB500 Electrical Box; CB500 Barrier

3825 Ohio Avenue, St. Charles, Illinois 60174

1-800-SENSOR2, FAX: 630-377-6495

www.systemsensor.com

I56-3870-001

1 2

Indice de contenidos

Pagina 1 - C1059-02

SS-460-010 I56-3870-001M500FP Firephone Control ModuleINSTALLATION AND MAINTENANCE INSTRUCTIONSBEFORE INSTALLINGThis information is included as

Pagina 2 - WIRING SUPERVISION

FROM PANEL OR(+)(-)TO NEXT(+)(-)DEVICE(+)(-)(-)(+)3.9K EOLRESISTORMODULE POLARITIES ARESHOWN IN ALARM32 VDC MAX.IS RECOMMENDEDBRANCH CIRCUITSBREAK ALL

Comentarios a estos manuales

Sin comentarios

System-sensor M500FP Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo System-sensor M500FP. System Sensor M500FP User Manual [en] [fr] [es] Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo System-sensor M500FP